{"product_id":"woodworking-veneer-cutter","title":"Woodworking Veneer and Panel Cutter with Bearing Rollers","description":"\u003ch2\u003eThe offcut of melamine is 4 mm too wide and the saw is out in the van.\u003c\/h2\u003e\n\u003cp\u003eYou hook the jaw over the edge of the board, feel the two bearings settle one on each face, and pull. The tool tracks the edge on its own because the wheels hold it square, and the line comes off in one long pass rather than in the ragged nibbles a knife leaves in a coated face. Two minutes on a workbench, no dust, no extension lead, no ear defenders.\u003c\/p\u003e\n\u003cp\u003eThe head is a blue anodised jaw with a roller bearing on the upper arm and a second one on a three bolt holder below it, so the gap between them can be set to the board. Above that is a curved grip that the maker names as polyethylene, on a body it calls an aluminium alloy matrix. It cotes the whole tool at 16 cm on the handle axis, 13 cm across the jaw and 490 g, and packs it in a printed box of 23 by 15.7 by 6.6 cm.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRolls rather than drags\u003c\/strong\u003e Two bearings work the material between them, so the tool tracks the edge instead of wandering the way a hand held knife does.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree materials named by the maker\u003c\/strong\u003e Aluminium composite panel, melamine board and wood veneer panel, which covers most of what gets trimmed on a fitting job.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eA stated thickness window\u003c\/strong\u003e 0.012 to 0.1 inch, roughly 0.3 to 2.5 mm. Knowing the ceiling before you buy is worth more than a vague promise.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable holder\u003c\/strong\u003e The lower bearing sits on a three bolt plate, so the gap is set rather than fixed at the factory.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo power and no dust\u003c\/strong\u003e 490 g in the hand, nothing to plug in, and no chips thrown across a finished room.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e the kitchen fitter, shopfitter or careful DIY worker trimming coated sheet and veneer on site, where a circular saw is more machine than the job needs.\u003c\/p\u003e\n\u003ch3\u003eWhy It Works\u003c\/h3\u003e\n\u003cp\u003eCoated sheet chips when a blade is dragged across the decorative face, which is why the trade cuts it from the back or scores it first. Putting the cutting work between two rolling bearings changes the geometry: the wheels turn as the tool moves, so the load stays perpendicular and the coated face is held rather than scraped. That is also why the thickness window is narrow. Past 0.1 inch the material stops yielding to a rolled cut and you are back to a saw. Note that the supplier written sheet describes this tool as a straight edge scraper. Its own labelled panels and its own photographs both show bearing rollers, so we have gone with the panels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Product Facts:\u003c\/strong\u003e hand cutter with two bearing rollers; lower roller on a three bolt adjustable holder; handle named by the maker as polyethylene; body named by the maker as aluminium alloy; maker gives 16 cm by 13 cm and 490 g; maker gives a working range of 0.012 to 0.1 inch, about 0.3 to 2.5 mm; maker names aluminium composite panel, melamine board and wood veneer panel; printed retail box of 23 x 15.7 x 6.6 cm; one cutter per pack.\u003c\/p\u003e\n\u003ch3\u003eHow It Fits Your Routine\u003c\/h3\u003e\n\u003cp\u003eTry it on an offcut first. Set the gap on the three bolt holder, take one slow pass, and look at both faces. That single test tells you more about how hard to pull and how fast to move than any instruction sheet, and it costs you a scrap of board.\u003c\/p\u003e\n\u003cp\u003eOn the job it earns its place in the bag rather than the van. It is the tool you reach for when the cut is a trim rather than a size change: easing a panel into a run of units, taking a millimetre off a veneer edge, squaring a composite offcut before it goes behind a splashback.\u003c\/p\u003e\n\u003cp\u003eStorage is a wipe and a drawer. Keep the bearings clean of resin and swarf so they still spin freely, check the three bolts are tight before a long session, and do not leave it in a damp toolbox where the rollers can seize.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow thick a board will it take?\u003c\/strong\u003e The maker gives 0.012 to 0.1 inch, about 0.3 to 2.5 mm. Beyond that it is a saw job, and forcing a thicker board through will damage the rollers rather than cut it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have a blade I need to replace?\u003c\/strong\u003e The cutting is done by the two bearing rollers, not by a removable blade, and the maker lists no spares in the pack. Keep them clean and spinning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it a safe tool?\u003c\/strong\u003e It is a cutting tool and we make no safety claim for it. Marketing panels supplied with it say otherwise; we do not endorse that wording. Work with the board clamped, keep your free hand behind the jaw, and treat the rollers as you would any edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e One cutter. The maker lists no spare bearings, no bolts and no case.\u003c\/p\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto; -webkit-overflow-scrolling: touch;\"\u003e\n\u003ctable style=\"border-collapse: collapse; min-width: 480px; width: 100%; font-family: Arial, sans-serif; border: 1px solid #ddd;\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"background-color: #f2f2f2; padding: 10px; border: 1px solid #ddd; text-align: left;\"\u003eFeature\u003c\/th\u003e\n      \u003cth style=\"background-color: #f2f2f2; padding: 10px; border: 1px solid #ddd; text-align: left;\"\u003eDetails\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003eType\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003eHand cutter for sheet material, working between two bearing rollers\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #ffffff;\"\u003eMaterials named by the maker\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #ffffff;\"\u003eAluminium composite panel, melamine board, wood veneer panel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003eThickness range\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003e0.012 to 0.1 inch as given by the maker, about 0.3 to 2.5 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #ffffff;\"\u003eHandle\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #ffffff;\"\u003ePolyethylene as named by the maker\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003eBody\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003eAluminium alloy as named by the maker, anodised blue\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #ffffff;\"\u003eAdjustment\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #ffffff;\"\u003eLower roller mounted on a three bolt holder\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003eSize\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003e16 cm by 13 cm as coted by the maker\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #ffffff;\"\u003eWeight\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #ffffff;\"\u003e490 g as coted by the maker\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003eIn the pack\u003c\/td\u003e\n      \u003ctd style=\"padding: 10px; border: 1px solid #ddd; background-color: #fafafa;\"\u003eOne cutter in a printed box of 23 x 15.7 x 6.6 cm\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Moko Boutique","offers":[{"title":"Woodworking panel cutter","offer_id":43038823153758,"sku":"SU00366526-Woodworking panel cutter","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0639\/7031\/2286\/files\/8bb59230-ca32-4b9d-a0fc-d3e9f32b73c0.jpg?v=1784672343","url":"https:\/\/www.moko.boutique\/es\/products\/woodworking-veneer-cutter","provider":"Moko Boutique","version":"1.0","type":"link"}