Handheld Metal Detector Wand with LCD and Vibration Alert

The line goes quiet at the door, then the wand does the talking.

You sweep it along the seam of a backpack and the green bar climbs rung by rung, the buzz in your palm tightening as the tip nears a set of keys, a belt buckle, a coin lost in a lining. Hold it over the spot and the tone holds steady, so you know where the metal sits before you ever open a pocket.

The ring shaped coil at the end reads a 360 degree field around its rim, not just the flat face, so a target slipping past the side still trips the alert. A short press of the power button wakes it, the LCD bar lights, and automatic tuning settles the baseline on its own with no dials to chase. At 410 mm long and 320 g, it swings one handed and hangs from the wrist strap between checks.

Key Benefits

• Proportional alerts The audio tone and hand vibration rise in intensity as the coil closes on a target, so the signal itself points you to the spot.
• Three ways to read a hit A green LCD bar, an audible tone and a vibrating grip report the same target, useful in a noisy hall or a quiet room.
• 360 degree ring coil The open ring senses metal around its whole rim and at the tip, not only head on.
• One touch, no tuning Automatic tuning sets the baseline at power on, with no sensitivity dials to balance before a sweep.
• Cited reach The maker rates detection to about 0 to 10 cm, with a single coin picked up at roughly 3 to 5 cm.
• Grab and go A 9V battery drops in behind the rear cover and the wrist strap keeps it on hand between scans.

Best for: Door staff and event checks, workshop users hunting nails or screws before a saw cut, and hobby detectorists who need a pinpoint wand to finish a dig started with a ground search unit.

Why It Works

Most misses at a checkpoint come from a coil that only reads its flat face. The open ring here watches its whole circumference and the tip, so a buckle sliding past the edge still registers. The intensity of the tone and buzz scales with distance, which turns a yes or no beep into a rough range finder you zero in on by ear and by feel.

Quick Product Facts: handheld ring coil metal detector; 410 x 76 x 147 mm; 320 g; LCD bar plus audible and vibrating alarms; detection range about 0 to 10 cm, single coin about 3 to 5 cm; powered by one 9V battery, type 6F22, not included; operating range minus 20 to 60 degrees C; black; wrist strap included.

How It Fits Your Routine

At an entrance you hold it a few centimetres off clothing and bags and let the rising tone walk you to the metal, then check the pocket it points at. In a workshop you run it over a reclaimed board before the blade goes in, catching a hidden nail the eye would miss.

Out in a field it rides in a pocket while a larger ground search detector does the sweeping. When that unit flags a patch, this wand narrows the target to a hand span so you dig once, not five times.

Between jobs, pop the rear cover to swap the 9V cell, wipe the shell down, and loop the strap over a hook. Keep it clear of magnets and phones while it tunes.

FAQ

How deep does it detect? The maker rates it to roughly 0 to 10 cm overall, with a single coin sensed at about 3 to 5 cm. Larger metal masses read a little further, small ones a little less.

Is a battery included? No. It runs on one 9V battery, type 6F22, that you add yourself. The box holds the detector, a user manual and a colour box only.

Does it tell metal types apart? No. It signals the presence and proximity of metal through tone, vibration and the LCD bar. It does not sort ferrous from non ferrous.

Can I use it one handed? Yes. At 320 g it sweeps easily in one hand, and the wrist strap keeps it secure between checks.