CALM DOG CAR TRAVEL

A bolster car bed that settles your dog on every drive

Two leather straps anchor it to the headrests, an anti slip base grips the seat, and a harness tether keeps your dog seated inside the padded ...

Best seller1 029 soldChoose Black, Green or Navy Blue, one roomy 120cm size for dogs up to 50kg

Shop now View product details

Leather headrest snap strapsHarness safety tether and buckleAnti slip dotted baseZip off washable cover

✓

4.7 1 029 sold

Introducing Bolster dog car bed with headrest straps and a tether:

Your dog settles into the back seat and stays put while you pull out of the driveway. This is a bolster bed built for the car. Two leather snap fasteners loop over the rear headrests and hold the bed firmly against the seat, while a short tether with a safety buckle clips to your dog's harness so they cannot lunge forward when you brake. The deep padded walls rise on all four sides, giving a nervous traveller a wall to lean into and a clear view out of the window. The base sits on an anti-slip dotted bottom that...

Before

After

Product details

Everything about this product

Car Anchored

Dog Car Seat Bolster Bed

A bolster dog bed built for the car. Two leather snap straps loop over the headrests and an anti-slip base grips the seat, while a tether clips to your dog's harness so they stay put when you brake. Padded walls give a nervous traveller an edge to lean on. The cover unzips for washing. Sizes 55x50x35cm up to 12.5kg and 120x42x45cm up to 50kg.

Six Features

Straps, Buckle and Anti-Slip

A close look at how the dog car bed stays secured: leather snap fasteners that loop over the headrests, a safety belt buckle that tethers to a harness, an adjustable cord, a bold handle anchor, a full-length zipper for the removable cover, and an anti-slip dotted bottom that grips the seat. Each detail keeps your dog steady on the drive.

Travel Sizes

Two Footprints For Any Dog

The dog car bed shown installed in a vehicle, strapped across the rear seat with a calm dog resting inside the padded walls. The bolstered sides rise high enough for a chin rest and a window view. It comes in two footprints: a 55x50x35cm size for pets up to 12.5kg and a longer 120x42x45cm size for larger dogs up to 50kg, in a two-tone green and orange finish.

Why this product

Why this dog car bed

1
Anchored To The Headrests
Two leather snap straps loop over the rear headrests and hold the bed firm against the seat, so it does not slide forward when you brake or turn.
2
Harness Safety Tether
A short cord with a safety buckle clips to your dog's harness, keeping them seated inside the padded walls rather than lunging toward the front.
3
High Bolster Walls
Padded sides rise around all four edges, giving a nervous traveller a wall to lean a chin on and a calm window view on longer drives.
4
Zip Off Washable Cover
A full length side zip lets the outer cover lift away from the padded core for a gentle machine wash, then slides back on once it is dry.

How it works

How to set it up

1
Loop the straps over
Loop the two leather snap straps over the rear headrests and press the snaps shut, so the bed locks firmly against the back seat.
2
Set the bed in place
Rest the bed against the seat so the anti slip dotted base settles onto the upholstery and grips it, keeping the bed from sliding.
3
Clip the harness tether
Once your dog hops in, clip the short safety buckle to their harness, which keeps them seated inside the padded bolster walls.
4
Let your dog settle
Your dog leans a chin on the high wall and watches out of the window, settling into a defined, cushioned spot for the whole drive.

✓

4.7 1 029 sold

Special offer

Introducing Bolster dog car bed with headrest straps and a tether:

Benefits

What this bed gives

Holds firm on the seat
Headrest snap straps and an anti slip base keep the bed steady, so it does not slide forward when you brake.
Keeps your dog seated
A harness tether clips on and stops a restless dog climbing toward the front while you drive.
Comfort for nervous trips
High padded walls give an anxious traveller a chin rest and a window view that settles pacing.
Simple to keep clean
A full length side zip lifts the cover off the padded core for a gentle machine wash.
Works at home too
It lifts out of the car and doubles as a floor nap bed, so your dog knows it before a drive.

Compare

Bolster car bed versus a loose mat

On the seat Headrest snap straps and anti slip base hold it steady Loose blanket that slides the moment you turn

Your dog Harness tether keeps them seated inside the walls Unsecured pet ends up in the footwell

Walls High padded bolster on all four sides for a chin rest Flat pad with no edge to lean on

The base Anti slip dotted bottom grips the upholstery Smooth backing that shifts on every bend

Cleaning Side zip cover lifts off for a machine wash Sewn in pad you cannot take out to clean

Off the road Lifts out and works as a floor nap spot at home Single use car mat with no other purpose

Bought together

Pairs well with this

Dog Car Seat Bolster Bed with Anchor Straps $851.99

Waterproof Pet Car Seat Mat $66.99

Total $0.00

Same category

Questions before checkout

How does the bed stay on the car seat?

Two leather snap straps loop over the rear headrests and press shut to hold the bed firmly against the seat, while an anti slip dotted base grips the upholstery underneath. Together they stop the bed sliding forward or shifting when you brake or take a corner. You set it up in seconds by looping the straps over the headrests and pressing the snaps closed, then resting the bed against the seat.

Does it keep my dog secured while I drive?

Yes. A short cord with a safety buckle clips to your dog's harness and keeps them seated inside the padded walls rather than climbing toward the front. It works with the headrest straps and the anti slip base, so the bed stays put and your dog stays in their spot. The tether is meant for a harness rather than a collar, so the load spreads across the chest and a restless dog settles.

What size is it and which dogs does it suit?

This bed measures 120 by 42 by 45cm and is built for larger dogs up to 50kg. The long footprint gives a bigger dog room to sit up, turn around or stretch out along the base, while the high bolster walls rise on all four sides for a chin rest. If your dog likes to curl rather than stretch, they tuck into one end against the padded edge. Check that the 120cm length suits your back seat first.

Can the cover be washed?

Yes. A full length side zip runs along the bed so the outer cover lifts off the padded core. Slip the cover away, machine wash it on a gentle cold cycle and let it air dry, then zip it back over the padding. Because the part that holds fur and travel smells is the part you can remove, the bed stays fresh between trips. Wipe the anti slip base with a damp cloth so the dotted grip keeps working.

Will the high walls help an anxious dog?

Many owners find they do. The padded bolster rises on all four sides, so a nervous traveller has a wall to lean into and a chin to rest on rather than an open, sliding seat. The raised edge gives a clear view out of the window, which often settles pacing and whining on longer drives. Paired with the harness tether, the walls turn the back seat into a defined spot your dog learns to ride in calmly.

What colours does it come in?

You can choose from three colourways in the variants: a two tone Green with an orange interior, a deep Navy Blue, and a Black leather look finish. The Green and Navy Blue use a smooth wipe clean oxford style outer, while the Black has a faux leather look. Whichever you pick, the build is the same: high bolster walls, headrest snap straps, a harness tether, an anti slip base and a zip off cover.

Can I use it at home as well as in the car?

Yes. Between drives the bed lifts straight out and works as a floor nap spot at home, so your dog already knows its smell and shape before they ride. The anti slip dotted base keeps it steady on hard floors too, and the bolster walls give the same tucked in feeling indoors. Letting your dog rest in it at home first often makes trips easier, since they climb into a familiar bed on travel day.

How do I set it up before a trip?

Setup takes under a minute. Loop the two leather straps over the back headrests and press the snaps shut, then rest the bed against the seat so the anti slip base settles onto the upholstery. Once your dog hops in, clip the tether buckle to their harness and they have a cushioned spot for the whole journey. When you arrive, unclip the tether and lift the bed out to use as a floor bed at home.

Dog Car Seat Bolster Bed with Anchor Straps ~~$1,277.99~~ $851.99

A bolster car bed that settles your dog on every drive

Introducing Bolster dog car bed with headrest straps and a tether: