Automatic Press Cup and Glass Rinser for the Sink

You upend a glass over the ring, press down, and a fan of water shoots up the inside, then you lift it clean and the stream cuts off on its own.

This is an automatic press cup and glass rinser that sits at the kitchen sink or behind a bar. A ring of press arms surrounds a central nozzle, and pushing a cup, glass or bottle down opens the valve so jets spray the inside; release the pressure and the water stops. The round base channels the runoff straight into the sink through its open lip.

It plumbs into the sink water line with the included braided stainless hose and brass tee, installs vertically to save counter space, and takes a half inch inlet and outlet. The body is plastic with a copper valve core rated for hot water up to 80 degrees Celsius, and it comes in black, silver, white or gold.

Key Benefits

• Press to rinse Push a cup or glass down and jets spray the inside; let go and the water stops.
• Strong stream A spiral opening and copper valve core drive a firm spray for a quick rinse.
• Fittings included Comes with a braided stainless inlet hose and a brass tee to tap the sink line.
• Space saving Installs vertically with a compact round base that drains into the sink.
• Handles hot water The copper valve core is rated for water up to 80 degrees Celsius.
• Four finishes Choose black, silver, white or gold to match the sink or bar.

Best for: home bars, coffee stations and kitchen sinks where you rinse cups, glasses, shakers or bottles often and want a quick hands free press rinse.

Why It Works

Rinsing a tall glass under a tap means holding it at an angle and hoping the water reaches the bottom. This flips the job, sending the spray up into the glass so the inside gets hit directly, and it only runs while you press so no water is wasted between rinses. The copper valve core is the part that takes the repeated pressing, which is why it matters more than the plastic shell.

Quick Product Facts: automatic press glass rinser; plastic body with copper valve core; central nozzle with press ring; half inch inlet and outlet; vertical install; rated to 80 degrees Celsius; includes braided hose and brass tee on select models; black, silver, white or gold.

How It Fits Your Routine

Mount it beside the sink, connect the braided hose to the water line through the brass tee, and it is ready. Press a glass down for a few seconds to rinse, then move it to the drainer.

Behind a bar it speeds up the rinse between pours; at a coffee station it clears a cup before the next drink. It also reaches into narrow bottles that a sponge cannot.

Wipe the base after use and let it drain into the sink; the open channel keeps water from pooling around it.

FAQ

How does it turn on? Pressing a cup or glass down opens the valve; releasing it stops the water.

How does it connect? Through the included braided hose and brass tee, which tap into the sink water line.

What is it made of? A plastic body with a copper valve core rated for hot water up to 80 degrees Celsius.

What comes with it? The rinser, and on select models a 60cm tube and a tee fitting.