Multifunctional Foldable Wire Stripping Pliers

One tool opens in your hand and the tangle of jobs gets simpler.

You are halfway through a wiring run and reaching for a third tool when this one does the job instead. It unfolds from a flat pocket shape, the stainless steel head lines up on the wire, and the marked notch bites through the insulation in one squeeze without nicking the copper.

This is a folding multifunction wire stripping plier. The stainless steel head carries strip notches marked from about 1.2 up to 3 millimetres, plus stations to cut, crimp, loop and split wire and to trim small screws. The handle is a non slip grip that folds the whole tool flat for a pocket or a kit.

Key Benefits

• Several jobs, one tool Strip, cut, crimp, loop and split wire and trim small screws without swapping tools.
• Marked strip notches Sized stations from about 1.2 to 3 millimetres let you match the notch to the wire.
• Screw cutting holes Threaded holes trim small screws from M2.5 to M4 and clean the end.
• Folds flat The handle folds the tool down to about 17 by 11.5 centimetres so it drops into a pocket or a bag.
• Stainless steel head The working head is stainless steel on a polypropylene handle with a soft non slip grip.
• Two handle colours Offered with a green and gray or green and white handle.

Best for: Electricians, makers and anyone running or repairing low voltage and household wiring who wants one folding tool in the pocket.

Why It Works

Putting the strip, cut, crimp, loop and screw stations on one stainless steel head means the tool that strips the wire also finishes the connection, and the folding handle keeps it small enough to actually carry. The marked notches take the guesswork out of matching the gauge.

Quick Product Facts: Stainless steel head with polypropylene handle; strip notches about 1.2 to 3 millimetres; cut, crimp, loop and split stations; screw cutting M2.5 to M4; needle nose tip; folds to about 17 by 11.5 centimetres; weight about 200 grams; green and gray or green and white handle; blister card version with English markings available.

How It Fits Your Routine

On a job it rides folded in a pocket and comes out for each connection, stripping and crimping without a trip back to the toolbox. At home it lives in a drawer for quick fixes on lamps, plugs and low voltage runs.

Because it folds flat and weighs little, it travels in a bag or a glovebox for repairs away from the bench.

Wipe the head clean after use and keep it dry so the pivot stays smooth and the notches stay sharp.

FAQ

What can it do? It strips, cuts, crimps, loops and splits wire and trims small screws, with a needle nose tip for gripping and bending.

What wire sizes does it strip? The marked notches run from about 1.2 up to 3 millimetres, so you match the notch to the wire gauge.

What is it made of? A stainless steel working head on a polypropylene handle with a soft non slip grip.

Does it really fold? Yes. The handle folds the tool flat to about 17 by 11.5 centimetres for easy storage and carry.