Portable Digital Car Tire Inflator

The low pressure light shows on the dash, and the inflator is already in the glovebox where you left it.

You pull over, run the cord to the socket by the gear lever, and thread the short hose onto the valve. Dial the pressure you want on the round display, press start, and the pump fills the tire and stops itself at the number, so you can watch the road instead of the gauge.

The body is black ABS with a circular digital screen reading in Bar and a row of buttons for the work light, the preset up and down, power, and the unit. A single cylinder pump moves 40L a minute, drawing 80W from the car socket over a cord of roughly 3M. In the box are a threaded air hose, a set of nozzle adapters and a storage pouch.

Key Benefits

• Preset and auto stop Set the target pressure and the pump fills to it, then shuts off on its own so a tire does not get overfilled.
• Digital pressure readout The round screen shows the current pressure in Bar as the tire fills, lit and easy to read at night.
• Runs from the car socket A cord of about 3M plugs into the 12V socket, so there is no separate battery to keep charged on this version.
• Built in work light An LED on the body lights the valve for a roadside top up after dark.
• Fits more than car tires The threaded hose and included adapters also suit motorbike and bicycle tires and sports balls.
• Packs away small The pump and its cord fold into the supplied pouch for the glovebox or boot.

Best for: drivers who want to top up their own tires at home or at the roadside, and motorbike or bicycle owners who need a compact pump in the car.

Why It Works

A single cylinder pump moving 40L a minute takes a car tire up in a few minutes of running, and the preset stop means you set the figure once and let it work. Power comes straight from the 12V socket, so there is nothing to recharge before a trip. The rated working time is 5 to 20 minutes, enough for a set of tires with a rest between them.

Quick Product Facts: ABS body; powered from the car 12V socket on a cord of about 3M; single cylinder pump; 40L per minute air flow; rated 80W; net weight 800g; digital display in Bar; LED work light; threaded hose, nozzle adapters and storage pouch included.

How It Fits Your Routine

On a driveway pressure check it plugs in, tops each tire to the set figure and stops, turning a fiddly monthly job into a few quiet minutes.

On the roadside a soft tire is back to pressure without a call out, the work light picking out the valve when it is dark.

At the weekend the same pump and adapters take a bicycle tire or a football, then fold back into the pouch.

FAQ

How is it powered? It plugs into the car 12V socket on a cord of about 3M. It does not carry its own battery on this version.

Does it stop by itself? Yes. Set the target pressure and the pump shuts off when the tire reaches it.

What can it inflate? Car and electric car tires, motorbike and bicycle tires, and sports balls using the included nozzle adapters.

What is in the box? The air pump, a 12V car power cord, a threaded air hose, nozzle adapters and a storage pouch.