Glow in the Dark Marble Protective Case Compatible with AirPods

You clip the marble shell shut over your AirPods case, drop it in your bag, and the scuffs land on the cover instead of the case underneath.

This is an aftermarket protective cover for the AirPods charging case. It is not made by Apple and carries no logo. The clear hard shell wraps the charging case in two snap together halves, so the whole case is guarded against knocks, dust and the loose keys at the bottom of a bag.

The material is a TPU and PC blend, firm enough to hold its shape yet soft at the seam so it clips on and off without a fight. A cutout at the base leaves the charging port open, so you can plug in without taking the cover off. A ball chain clips to the side, ready to hang from a bag strap or a belt loop.

Key Benefits

• Full shell coverage Two snap halves wrap the charging case top and bottom against knocks and dust.
• Glow in the dark The shell soaks up light and gives off a soft glow in a dark room, with no battery and no bulb inside.
• Open charging port A cutout at the base lets the cable reach the port with the cover left on.
• Marbled colour swirl Each shell carries a marbled swirl of colour set into the clear plastic.
• Clip on ball chain The included chain hangs the case from a bag, a belt loop or a set of keys.
• Pick your fit Options cover AirPods 1 and 2, Pro and Pro 2, AirPods 3 and AirPods 4.

Best for: anyone who wants to keep an AirPods charging case clean and easy to spot, with a glow that helps you find it in a dark bag at night.

Why It Works

The glow comes from a phosphorescent pigment in the plastic, not from any electronics. Hold the shell under a lamp or daylight for a while and it releases that stored light slowly once the room goes dark. There is nothing to charge and nothing to switch on, so the only upkeep is a wipe with a dry cloth.

Quick Product Facts: Material: TPU and PC blend; Type: two piece snap cover for the AirPods charging case; Finish: marbled swirl, glow in the dark; Included: cover and clip on ball chain; Fits: AirPods 1, 2, 3, 4, Pro and Pro 2 by option; Not made by Apple.

How It Fits Your Routine

Snap the cover over your charging case once and leave it on. Charging still works through the base cutout, so your habit of dropping the case on the cable at night does not change.

Clip the ball chain to the outside of your bag so the case rides where you can reach it. The marbled colour makes your case easy to tell apart from a friend who carries the same earbuds.

Give the shell a few minutes near a window or a lamp during the day. When you reach into a dark bag or a bedside drawer later, the soft glow points you straight to it.

FAQ

Is this made by Apple? No. It is an aftermarket cover that fits over an AirPods charging case. It carries no Apple logo and is not an official or licensed product.

Does the glow use a battery? No. The plastic holds a phosphorescent pigment that stores light and releases it in the dark. There is no bulb, no LED and nothing to charge.

Do all the colours glow? The photos show every colourway glowing in a dark room. Two of the option names spell it out as Luminous blue and Luminous red, so choose one of those if the after dark glow is your main reason to buy.

Which AirPods does it fit? Choose the model at checkout. Options cover AirPods 1 and 2, AirPods Pro and Pro 2, AirPods 3, and AirPods 4. Match the option to the case you own.