The AirTag slides into the case, the cover snaps shut, and the collar threads through the back loop.

This is a soft silicone holder that carries an Apple AirTag on a pet collar. The tag drops into the case, the front cover presses closed with a single snap, and the strap of a flat collar passes through the loop on the back. The whole piece sits flat against the neck under the fur, with no metal clip to catch on a bush and no weight swinging against the chest when the dog runs.

The cover seals around the edge, so rain, mud and the water of a pond or creek stay off the tag inside. It fits flat collars up to thirty millimeters wide, in four collar sizes from XS to L, and works on dogs, cats and rabbits.

Key Benefits

• Sealed silicone cover Snaps shut around the AirTag and keeps rain, mud and creek water off the tag.
• Sits flat on the collar Rests against the neck under the fur, with no rattle when the pet runs or shakes.
• Threads onto flat collars The back loop passes the strap of any flat collar up to thirty millimeters wide.
• No exposed metal No clip to snag on a hedge and no swinging weight against the chest.
• Easy battery access Pull the cover off with a thumbnail to change the AirTag battery, then snap it back without a tool.
• Four collar sizes XS, S, M and L cover small cats through larger dogs.

Best for: dogs, cats and rabbits whose collar needs to carry an AirTag through walks, rain and muddy ground.

Why It Works

An AirTag on its own has nowhere to sit on a collar. This holder gives it a sealed seat that threads onto the strap, stays flat under the fur, and keeps water and mud away from the tag, so a lost pet becomes a quick check on the phone instead of a search through the neighborhood.

Quick Product Facts: Material: soft silicone; Compatible with: Apple AirTag; Collar width: flat collars up to thirty millimeters; Collar sizes: XS 28-35x2cm, S 28-40x2cm, M 38-50x2.5cm, L 48-60x2.5cm; Protection: water resistant sealed cover; For: dogs, cats and rabbits; Care: wipe with warm water.

How It Fits Your Routine

The cover snaps over the AirTag once and the loop threads onto the collar once. After that the tag rides along with the pet on every walk, with the phone showing the location whenever you open the app.

For battery changes the cover pulls off with a thumbnail and snaps back the same way, so the tag stays charged and the holder stays on the collar between swaps.

FAQ

What collars does it fit? Flat collars up to thirty millimeters wide, in four sizes from XS 28-35x2cm to L 48-60x2.5cm.

Will it survive rain and mud? The cover seals around the edge of the AirTag, so rain, mud and creek water stay off the tag inside.

Which pets can wear it? Dogs, cats and rabbits, as long as the collar is flat and within the listed width.

How do I change the AirTag battery? Pull the cover off with a thumbnail, swap the battery, then snap the cover back on without a tool.