Auto Clamp Car Phone Holder with 15W Wireless Charger

You clip it onto the air vent, set your phone against the sensor, and the arms close around it

The holder sits on the dash vent with a round visor face that glows with two light rings once it is powered. Bring your phone to the sensor and the side arms move in from both sides, then wireless charging starts with no cable to untangle in a moving cabin.

The body is shaped like a small astronaut: a round face, two clamp arms and two support feet at the base. A ball joint clip grips the vent slat, a detachable suction cup bracket offers a second way to mount it, and the front plate carries a Fashion wordmark.

Key Benefits

• Automatic clamping Gravity sensing and electric locking bring the two side arms in around your phone when it reaches the sensor.
• 15W wireless charging Up to 15W of wireless output, rated DC5V 2A and DC9V 1.67A, with a charging distance of up to 10 mm.
• Air vent mount A ball joint clip grips the air vent slat, and a detachable suction cup bracket is there for flexible mounting.
• Works with many phones Apple and Huawei models are recognized, and optional receivers cover Apple, Android and Letv Type-C phones.
• Night charging light A built-in LED breathing light glows when the holder is plugged in, so charging status stays readable in low light.
• Four colors Black, silver, teal and rose red, each with the same round face and clamp arms.

Best for: Drivers who want phone holding and wireless charging in one unit on the dash vent, and anyone looking for a car gadget gift.

Why It Works

Two jobs share one body. The arms close from both sides toward the center, so the phone settles on the charging area while it is held, and the sensor does the clamping instead of a thumb screw.

Quick Product Facts: Model S20; 15W max wireless output; rated DC5V 2A and DC9V 1.67A; 5V/2A input; charging distance up to 10 mm; 125 x 78 x 52 mm; air vent clip with detachable suction cup bracket; LED breathing light; black, silver, teal and rose red.

How It Fits Your Routine

Before you set off, clip the holder onto the vent, power it and bring the phone to the sensor. The glowing face confirms it is awake and the arms take over from there.

On a night drive the breathing light stays visible in a dark cabin, so you read the charging status at a glance without touching the screen.

Moving it to another vehicle means unclipping it from one vent slat and clipping it onto the next, and the optional receivers extend charging to phones without built-in wireless charging.

FAQ

Which phones can it charge? Phones with wireless charging charge directly. For other Apple, Android and Letv Type-C phones, optional receivers are available.

How does it hold the phone? Gravity sensing and electric locking close the two side arms around the phone, with two support feet at the base.

How do I mount it? Clip it onto an air vent slat with the ball joint clip. A detachable suction cup bracket gives you a second mounting option.

What power does it need? The input is 5V/2A, and the rated output is DC5V 2A or DC9V 1.67A, up to 15W.