KT LED900S E-Bike Display Panel for Kunteng Controllers

One glance at the handlebar tells you speed, battery and faults

A compact LED display panel for electric bicycles that use a KT (Kunteng) brushless controller. The round dial reads your speed, a five-segment bar shows battery power, and a fault icon lights up when the system needs attention. Three buttons, up, power and down, handle the controls, including the 6 km/h push mode.

The panel runs on 36 V or 48 V systems and connects through a standard 5-pin plug on an 1800 mm cable. It measures 82 x 48 mm (3.2 x 1.9 in), weighs 119 g and is listed IP65 waterproof for riding in wind and rain. Before you order, look for the KT logo on your controller label, as shown in the product photos with a model such as KT36/48ZWSR-ff01.

Key Benefits

• Speed, power and fault on one dial A round LED dial with speed, 6 km/h push, fault and power icons, plus a five-segment battery bar.
• Made for KT controllers Designed for the Kunteng protocol, so it pairs with KT (Kunteng) brushless motor controllers.
• 36 V and 48 V One panel for 36 V and 48 V electric bicycle systems.
• Standard 5-pin plug A standard 5-pin connector on an 1800 mm cable, with one standard connector in the package.
• IP65 waterproof listing Listed as IP65 waterproof for wind and rain, in a compact black housing of 82 x 48 mm and 119 g.

Best for: Electric bicycle owners and builders who run a KT (Kunteng) controller and want a clear LED display for speed, battery power and fault status.

Why It Works

A display only helps if you can read it at a glance, so this panel keeps the layout simple: one dial, four icons and three buttons. The model name printed on the panel is KTLED900S, which makes it easy to match against your controller and your build notes.

Quick Product Facts: Product name KTLED900S instrument panel; voltage 36 V and 48 V; plug 5-pin standard; cable length 1800 mm; size 82 x 48 mm (3.2 x 1.9 in); weight 119 g; color black; protocol compatibility Kunteng (KT); IP65 waterproof listing; packing list one display instrument and one standard connector.

How It Fits Your Routine

Mount it on the handlebar within reach of your thumb, route the 1800 mm cable to the controller and plug in the 5-pin connector. From the first ride, the dial shows speed and the bar shows battery power.

On a steep start or a walk beside the bike, the 6 km/h push mode is one press away. If the fault icon lights up, you see it straight away on the dial.

FAQ

Which controllers does it work with? It is made for KT (Kunteng) controllers. Check that your controller label carries the KT logo, as in the product photos, for example a model such as KT36/48ZWSR-ff01.

Which voltage does it support? 36 V and 48 V.

Which plug does it use? A standard 5-pin plug on an 1800 mm cable.

What is in the package? One display instrument and one standard connector.

Is it waterproof? It is listed IP65 waterproof for wind and rain. Avoid leaving it in prolonged rain.