Cold Mist Hair Straightener with Removable Water Tank and 3 Heat Settings

Open the arm and there is a water tank sitting where a straightener normally has nothing at all.

Seven in the morning, hair still holding the shape the pillow gave it, and the usual choice between damp hair and a dry pass. This iron takes a third route. A small transparent tank clips into the lower arm, and a nozzle at the tip of the plate housing lets out a cold mist as the plates travel down the section. You fill the tank at the tap, snap it back, and work through the hair the way you always have.

The rest is a straightener and behaves like one. A PTC element heats the plates, a single button steps through three heat levels, and the whole thing draws 36 watts from a wall socket through a fixed cord. There is no battery in it and none is claimed. The body comes in a soft pink with a rose toned plate housing, and the maker lists a white as well.

Key Benefits

• A removable tank you can actually refill The tank slides out of the arm, takes tap water, and clips back. The maker states one fill covers three to five styling sessions.
• Cold mist, not steam The maker calls the process physical atomisation and describes the mist as cold rather than heated. The mist nozzle sits at the tip of the plate housing, above the plates.
• Three heat levels on one button The single power button steps through three settings. The maker does not print a temperature for any of them, so treat level one as your starting point.
• PTC heating rather than a bare coil A PTC element is what the specification names for the plates. The maker describes the plate face as carrying a plant protein coating.
• Mains powered and light in the hand 36 watts through a fixed cord. Choose the US or the EU plug at checkout, and check the section below on voltage before you do.

Best for: anyone who straightens dry hair and wants a little water back into the section as they work, who prefers a slim corded iron to a bulky one, and who is happy with three preset levels rather than a temperature dial.

Why It Works

Most irons ask you to add moisture before you start, from a spray bottle that soaks one section and misses the next. Putting the water inside the tool changes when the moisture arrives, because the nozzle releases it in the same pass as the plates rather than five minutes earlier. That is the whole mechanism and it is worth being plain about it. We are describing what the tool does, not promising what it will do to your hair, because no test report accompanies this iron and the maker's own panels make claims we are not going to repeat. What we can tell you is what is in your hand, a slim corded iron with a refillable tank, three heat levels and a PTC element.

Quick Product Facts: corded cold mist hair straightener; removable transparent water tank in the lower arm; mist nozzle at the tip of the plate housing; PTC heating element; three heat levels on one button, no temperature printed by the maker; rated 36 W at 220 V; plug standard chosen at checkout, US or EU; colours pink and white; packing list is the straightener and a user manual.

How It Fits Your Routine

The first run is a dry run. Fill the tank, plug in, let the plates come up, and take a small section at the back of the head where a mistake stays hidden. Learn how much mist lands on one pass at level one before you go anywhere near the sections that frame your face.

After a week or two the tank becomes the habit rather than the iron. Fill it when you fill the kettle, because a dry tank on a hot iron gives you nothing that a plain straightener would not. The maker rates one fill at three to five sessions, which in practice means checking the window every few uses.

Care is short. Unplug, let the plates go cold, empty the tank rather than leaving water standing in it, and wipe the plates with a dry cloth. Nothing about this iron is described as washable, so keep water to the tank and the tap.

FAQ

Does the mist protect my hair from the heat? We are not claiming that. The maker's panels do, in several ways, and none of them comes with a test report. What the tool actually does is release a cold mist from a nozzle in the same pass as the heated plates. Judge the result on your own hair.

What temperature do the three settings reach? The maker does not say, anywhere on the sheet or on the panels. There are three levels and a single button, and no number is printed against any of them, so we will not invent one for you.

Is it cordless? No. The specification lists a wired AC supply at 220 V and 36 W. There is no battery, no charging port and no runtime, because there is nothing to run down.

Which plug should I choose? The option offers a US plug and an EU plug. Note that the maker rates the iron at 220 V, which is European mains, so if you are on a 110 to 120 V supply check with the maker before ordering the US plug.