Bedside Sleep Speaker with White Noise and Shutoff Timer

You set it for thirty minutes, and it stops before you do

Three figures run along the white front edge: 30, 60 and 90, with a small light above each one. Press the timer button until the number you want is lit, and the speaker shuts itself off after that many minutes. That single detail is the whole reason a bedside speaker is different from any other speaker, because nothing is worse than surfacing at three in the morning to an episode that has been running for four hours.

The rest is deliberately plain. A light blue woven cloth covers the driver, the lower half is a white plastic band, and the only controls are power, source and the timer. There is no clock face, no screen and no glow other than three pinpricks beside the timer numbers, which is exactly what you want on a nightstand in a dark room.

Key Benefits

• A timer you can set in the dark Three positions printed on the edge, 30, 60 and 90 minutes, each with its own indicator light.
• Sound with the phone in another room A white noise track is stored on the speaker itself, so it plays with nothing paired to it.
• Or paired, when you want your own audio Bluetooth for podcasts and playlists, with the maker naming Bluetooth 5.0.
• Nothing bright at the bedside No screen, no clock and no standby light, just the three small timer indicators.
• One cable, one charge USB-C on the front edge, with the maker giving 12 hours or more of use per charge.

Best for: anyone who falls asleep to podcasts and wakes to a dead phone battery, light sleepers who want a background sound source that ends by itself, and travellers who want the same background in a hotel room.

Why It Works

Almost every speaker plays until you stop it, which is fine in a kitchen and wrong beside a bed. Putting the shutoff on the front edge as three printed numbers rather than inside an app means you set it with one finger, eyes closed, without unlocking anything. Pairing the timer with a white noise track stored on board is the other half of it: the phone never has to come into the bedroom at all.

Quick Product Facts: round bedside speaker with a woven light blue top and a white plastic control band; three buttons, power, source and timer; shutoff timer at 30, 60 and 90 minutes with an indicator light for each; built in white noise track; Bluetooth 5.0 as named by the maker; USB-C charging; 200 g; the maker states 12 hours or more per charge; supplied with a USB-C cable and a manual; one finish, light blue.

How It Fits Your Routine

At bedtime you press the timer to 30 or 60, start the white noise track, and put the phone on the far side of the room. The speaker runs and then goes quiet on its own, which is the part a phone alarm app never gets right.

For a podcast, pair it first and the timer still applies, so an episode fades out at the number you set rather than rolling into the next one. The controls are the same either way.

Away from home it travels in a jacket pocket and gives an unfamiliar room a familiar background. The cloth face takes dust rather than fingerprints, so a soft brush is the entire cleaning routine.

FAQ

Does it have a screen or a clock? No. The spec sheet lists a digital display, but the photographs show no screen anywhere on the unit. What is there are three small indicator lights beside the printed timer figures, so we are describing what is actually on the product.

How long does the battery last? The maker states 12 hours or more per charge. The capacity is given only as a range, which is a marketplace filter band rather than a real figure, so we are quoting the runtime as the maker's own number and printing no capacity.

Will it help me sleep? We make no claim about that. This is a speaker with a shutoff timer and a white noise track. It plays audio at bedtime, it does not act on you, and nothing here is a health or sleep product.

Can I use it in the bathroom or by a pool? No water resistance rating is stated by the maker, so treat it as a dry indoor speaker and keep it off wet surfaces.