Baby Non Inflatable Swim Float with Removable Sun Canopy

You take it out of the box and there is nothing to do to it: no valve, no pump, no ten minutes of blowing on the poolside while a small person waits.

The body is a sealed oval of foam under a fabric skin, closed along the underside with a bound seam, and the word AIR FREE is printed across the top of it. A raised bolster sits at the back as a headrest, a printed animal face sits at the front, and between them a grey fabric panel carries two leg openings. Mint green wears a face with swim goggles, blue wears a seal, pink wears a flamingo.

A webbing harness crosses the bolster with two shoulder straps and a centre release buckle. The canopy is a separate fabric shade on a sprung frame that clips to the body with plastic snap fasteners and lifts straight off again, with a mesh window in one side so you can see the child from the poolside. The maker's own printing on the body gives a product code and a production date, and a sewn label carries the maker's mambobaby name.

Key Benefits

• Nothing to inflate There is no valve anywhere on this float and no air chamber to fill. It arrives at its full size and it stays there, which also means there is nothing to puncture on a rough poolside.
• Canopy that unclips The shade lifts off at four plastic snap fasteners, so the same float works with it on in the middle of the day and off in the late afternoon.
• A seat, not a ring The grey fabric panel in the middle has two leg openings, so the child sits into the float rather than balancing on a tube.
• Harness on the bolster Two webbing shoulder straps meet at a centre release buckle behind the back rest, and the buckle opens with one press when you lift the child out.
• Mesh window in the shade One side of the canopy is mesh rather than solid fabric, so the child stays visible from the side of the pool with the shade up.
• Three printed faces Mint with goggles, blue as a seal, pink as a flamingo, each with the same body, the same harness and the same canopy fitting.

Best for: Parents of a baby within the age range the maker states, for short supervised sessions in a home pool, a paddling pool or a hotel pool, always at arm's reach.

Why It Works

What this float does is structural and visible. The foam body holds its own shape without any air, so it arrives at full size and stays there. The fabric seat holds the child's legs in two openings rather than letting them slide, the buckle opens with one press, and the canopy lifts off. It is made to seat and shade a baby for supervised water play, never to replace a grown up's hands, so keep an adult within arm's reach for every second the child is in it and lift the child out the moment the session ends. It is not a life saving device.

Quick Product Facts: Baby swim float; sealed foam body under a fabric skin, printed AIR FREE, no valve and no air chamber; raised rear bolster; printed animal face at the front; grey fabric seat panel with two leg openings; webbing shoulder harness with a centre release buckle; removable canopy on a sprung frame with four snap fasteners and a mesh side window; mint green, blue or pink; maker states 3 to 24 months; for supervised water play with an adult within arm's reach.

How It Fits Your Routine

The first time, do it dry. Sit the float on a towel, open the buckle, put your child in through the leg openings, close the buckle and see how the legs sit and where the bolster falls behind the shoulders. Two minutes on the floor tells you more than the first two minutes in the water, and it is where you find out whether your child is inside the age range the maker gives.

In the water, get in first, then lower the float with the child already in it, and keep one hand on the body of the float. Stay within arm's reach the whole time. Keep sessions short, watch the child's face rather than the float, and lift both out together at the end rather than tipping the float.

Afterwards, rinse the fabric skin with fresh water, unclip the canopy and let both dry fully open before storing. Store it away from a radiator and away from any flame: the canopy itself carries a printed warning to keep it away from fire.

FAQ

Do I have to inflate it? No, and that is the correction we made to this listing. The supplier sheet calls it an inflatable float and names a valve diameter, but the product photographed here prints AIR FREE across its own body, shows no valve on any face and is a sealed foam form closed by a bound seam. The object wins over the sheet, so we retitled it.

How should my baby use it? With an adult within arm's reach for the whole time, every time. It is a foam seat and shade for supervised water play, not a life saving device, so keep your hands close and lift your child out the moment the session ends.

What age is it for? The maker states 3 to 24 months. Judge your own child against the seat and the leg openings, and ask us if you would like us to request a measurement before you order.

What is printed on the float itself? The body carries the mambobaby name, a product code, a production date and the words air free. The canopy carries a printed reminder to keep it away from fire, so store it clear of any flame or radiator.