Lift the lever, and hot and cold water meet in one stream at the basin

You walk into the bathroom, lift the lever, and one handle does the work: it opens the flow and mixes hot with cold for comfortable use. The chrome finish catches the window light, and the two threaded shanks disappear under a clear base plate that sits flat on the basin.

This is a two-hole basin mixer. Two brass-toned shanks, 20 mm across and 48 to 50 mm long, carry the hot and cold feeds through the countertop, and the design is made for double-hole or triple-hole washbasins with 10 to 10.5 cm hole spacing. Nine designs are offered, four HJ and five marked brass material, each with its own handle shape, height and weight printed on its option photo.

Key Benefits

• One lever for hot and cold A lift-up lever sets the flow and mixes hot and cold water, so there is a single handle to reach for.
• Ceramic disc valve core The ceramic disc core gives smooth operation and leak-proof performance.
• Copper alloy or brass body The body is copper alloy, and five of the nine designs are marked brass material on their photos, with weights from 630 g to 850 g.
• Electroplated chrome finish A bright electroplated surface finish, with a salt spray test level listed at grades 3 to 5.
• Standard connections 4 point inlet and outlet connections and one set of mounting hardware, for standard 4 point inlet and outlet pipes.
• Made for two or three holes Countertop basin mount for double-hole or triple-hole washbasins at 10 to 10.5 cm spacing.

Best for: Homeowners and renovators swapping the tap on a double-hole or triple-hole washbasin with 10 to 10.5 cm between the holes.

Why It Works

The pairing is simple: a lift-up lever on top, a ceramic disc valve core inside, and a copper alloy or brass body under a chrome finish. The clear base plate and the two threaded shanks fix the faucet to the basin in two points, so the choice that matters is the design. Handle shapes run from curved to flat, heights from 89 mm to 134 mm, and the printed weights from 400 g to 850 g.

Quick Product Facts: Material copper alloy, five designs marked brass; finish electroplated; valve core ceramic disc; inlet and outlet 4 point; installation countertop basin mount; opening by lift-up handle; hole spacing 10 to 10.5 cm; weight 400 g to 850 g by design; salt spray test level grades 3 to 5; working pressure atmospheric pressure; packing list faucet x1 and mounting hardware x1 set.

How It Fits Your Routine

Morning and evening, the lever is the only thing your hand touches: lift it for water, lower it to stop. The basin stays uncluttered because a single handle replaces a separate hot tap and cold tap.

Before ordering, measure the distance between the two faucet holes on your washbasin. If it reads 10 to 10.5 cm, pick the design whose handle shape and height you like, then choose a tube option in the Series option: No Tube, a 60 cm tube set, or an 80 cm tube set.

When you install, the shanks pass through the holes, the nuts tighten from underneath, and the 4 point inlet and outlet connections link to the supply pipes. The mounting hardware set is in the box.

FAQ

Which basins does it fit? Double-hole or triple-hole washbasins with a hole spacing of 10 to 10.5 cm, as shown on the maker's shopping tips panel. A single-hole basin needs a single-hole faucet.

What is in the box? One faucet and one set of mounting hardware. Supply tubes come with the 60 cm and 80 cm choices in the Series option.

Is the body brass? The listing gives copper alloy as the material, and five designs (Brass Shendas, Brass IELTS, Brass Mingjia, Brass Sailuo and Brass Feixiang) carry a brass material mark on their option photos.

How do I read the sizes? Each option photo prints the width, height, shank spacing and weight of that design in millimetres and grams. The size guide button lists them side by side.