Desktop Dust Collector Vacuum with LED Light

The drill kicks up a plume of dust and the desktop collector pulls it straight off the bench before it drifts.

This desktop dust collector sits beside your work and draws filing and polishing dust into a washable filter, through a flexible gooseneck hose with three LED lights aimed at the spot you are working on.

It is built for detail work: nail art, denture and dental lab polishing, jewellery and model making. A 60 W motor moves 52.45 CFM of air through a 600 mm hose, and the ABS housing stands 600 mm tall on a weighted base.

Key Benefits

• Strong suction A 60 W motor pulls 52.45 CFM to catch dust close to the work.
• Three LED lights Built into the hose head to light the work area.
• Flexible gooseneck hose The 600 mm hose bends and holds position to aim the intake where you need it.
• Washable filter The reusable filter core cleans with an air blower and lasts two to three months.
• Universal voltage Runs on AC 100 to 240 V with EU and US plug options.
• Desk sized 215 by 199 by 600 mm and 1.3 kg.

Best for: nail technicians, dental and jewellery lab benches, and hobbyists who grind, file or polish and want the dust caught at the source.

Why It Works

Fine dust drifts and settles over everything unless it is captured where it is made. Placing the intake right next to the work, with the light on the same spot, means the debris goes into the filter instead of the air and your bench.

Quick Product Facts: 60 W; AC 100 to 240 V, 50/60 Hz; 52.45 CFM airflow; 41.1 mm pressure; 600 mm flexible hose; 62 mm inlet; washable filter 177 by 170 by 13 mm, reusable two to three months; three LED lights; ABS housing; 215 by 199 by 600 mm; 1.3 kg; EU and US plug options.

How It Fits Your Bench

Set it beside the work, bend the hose to the piece, and switch it on before you start filing or polishing so the dust never gets airborne.

When the filter loads up, pop it out and clear it with an air blower rather than replacing it; it is good for two to three months of regular use.

Choose the EU or US plug version for your outlet; the motor accepts AC 100 to 240 V either way.

FAQ

What is it used for? Capturing dust from detail work such as nail art, denture and dental lab polishing, jewellery and model making.

Do I replace the filter? No. The filter core is washable and reusable, cleaned with an air blower for two to three months at a time.

What voltage does it use? AC 100 to 240 V, 50/60 Hz, with EU and US plug options.

Does it light the work? Yes. Three LED lights in the hose head shine on the work area.