One dial does what a row of straps used to do.

Foot on the floor, the moulded shell dropped down the outside of the ankle and the stirrup slid under the arch. The padded cuff comes round, then the dial turns between two fingers and the cable pulls the whole thing in a click at a time. Turning it the other way lets it all off again in one movement.

Held in the hand it is a rigid moulded plastic shell with a fabric cuff at the top, cable guides riveted down the side panel and a stirrup that passes under the foot. The maker gives a 3 mm structure, a chart of five sizes from 7.8 by 15 cm to 11.2 by 18.5 cm, and a weight of 125 g for four of them and 145 g for the largest. Each size is offered for the left foot or the right, in grey and black or all black.

Key Benefits

• Rotary dial One dial draws a cable through riveted guides, so tension goes on a click at a time and comes off in one movement.
• Moulded stirrup A shaped plastic stirrup passes under the arch and joins the side shell.
• Padded cuff The top of the brace is a fabric cuff rather than bare plastic.
• Five dimensioned sizes 7.8 by 15 cm at S up to 11.2 by 18.5 cm at XXL, published by the maker as a table.
• Left or right Each size exists in a left foot and a right foot version. The shell is handed and cannot be swapped.
• Light for its rigidity 125 g on four of the five sizes and 145 g on the largest, as given by the maker.

Best for: anyone who wants one tightening point instead of several straps, and who would rather pick from a table of real dimensions than from an unmeasured letter size.

Why It Works

The dial is the difference. A strap brace has as many tension decisions as it has straps, and they interact. Here the cable runs through fixed guides, so one turn changes the whole path evenly, and the same setting can be repeated exactly the next day. The published size table is the other half: five sizes with real centimetres against them means the choice can be checked with a tape measure rather than guessed.

Quick Product Facts: moulded plastic ankle brace with a rotary tightening dial; cable running through riveted guides; moulded stirrup under the arch; padded fabric cuff; 3 mm structure as stated by the maker; five sizes, S 7.8 by 15 cm, M 9.5 by 16 cm, L 10 by 17 cm, XL 10.8 by 17.5 cm, XXL 11.2 by 18.5 cm; 125 g on S to XL and 145 g on XXL; left foot or right foot; grey and black or all black; package 24 by 13 by 8 cm; one brace per pack.

How It Fits Your Routine

Measure before ordering rather than after. The maker publishes both dimensions for each size, so a tape round the ankle and along the foot answers the question in a minute. Choose the side carefully as well: the shell is handed, and a left brace will not sit on a right foot.

Day to day it goes on before the shoe and comes off after it. Slide the stirrup under the arch first, seat the shell against the outside of the ankle, close the cuff, then turn the dial in small steps and walk a few paces between them. Most people find the right number of clicks in the first week and repeat it without thinking after that.

Release the dial fully before pulling the brace off, otherwise the cable drags across the guides. Wipe the shell with a damp cloth, let the cuff dry in the air rather than on a radiator, and check the guides and rivets every few weeks, since a frayed cable is the one part of this design that ends its life.

FAQ

What does the brace do? It wraps the ankle in a rigid moulded shell with a stirrup under the arch, and the dial draws it in for a firm, adjustable hold around the joint. Turn the dial up for a closer hold and back for an easy release.

How do I pick a size? From the maker's table, which gives two centimetre figures per size, from 7.8 by 15 cm at S to 11.2 by 18.5 cm at XXL. The maker also notes shoe sizes 35 to 37 against S, and gives no shoe range for the other four.

Can one brace do both feet? No. The shell is handed, and each size is sold as a left foot version or a right foot version.

What is in the box? One brace. There is no second unit, no spare cable and no case.