★★★★★
Mold is the best part
Special offer
Silicone Treat Ball And Snack Mold
Product details

Traiter la balle
Une balle à friandises en silicone alimentaire qui s’ouvre par torsion, accompagnée d’un moule à quatre cavités pour préparer des palets de friandises glacées maison. Placez une friandise dans la rainure centrale, refermez la balle en la tournant, puis votre animal la lèche et la pousse à travers les ouvertures latérales pour la récupérer, tandis que la bande nervurée lui offre une surface à mâcher. Les deux pièces se dévissent et se rincent facilement. Choisissez le vert, l’orange ou le jaune pour la balle, le moule ou l’ensemble complet.

Auge et fentes
Une friandise se loge dans la rigole circulaire au centre de la balle, et votre animal doit la lécher et la pousser à travers les ouvertures en forme de croix pour la faire sortir petit à petit. La bande striée qui entoure la moitié inférieure offre aux dents une surface à agripper et à mordiller : une friandise vite avalée devient ainsi une longue séance de mastication apaisante. En silicone souple de qualité alimentaire, doux pour la bouche et suffisamment résistant pour les mordilleurs quotidiens.

Moule à collations
Le moule jaune comporte quatre cavités rondes qui permettent de congeler des palets maison à partir de la nourriture de votre animal, afin que vous contrôliez exactement ce qui se trouve dans la balle. Déposez-y à la cuillère son aliment préféré, congelez-le jusqu’à ce qu’il soit bien ferme, puis placez un palet dans l’ouverture. Réutilisez le moule aussi souvent que vous le souhaitez et gardez-en une réserve au congélateur. Une fois la friandise terminée, dévissez la balle et rincez les deux pièces sous le robinet.
Why this product
Pack a snack into the central trough and your pet licks and chews through the side slots to win it, turning a quick treat into a long, calm chew.
The ball rotates apart at the middle seam, so you load a fresh snack in seconds and twist it shut again, ready to refill and reuse over and over.
The yellow mold has four round cavities that freeze homemade pucks from your pet's own food, so you control exactly what goes inside the ball.
Both pieces are molded from soft, non-toxic food-grade silicone, gentle on the mouth, built to take a determined chewer, and easy to rinse clean.
How it works
Spoon your pet's food into the four round cavities of the yellow mold and freeze it into firm pucks, so a homemade snack is always ready to load.
Rotate the ball apart at the seam, press a snack or a frozen puck into the central trough, then twist the two halves back together until snug.
Set it down and your pet licks and nudges through the side slots to free the food bit by bit, while the ribbed band gives the teeth a chew.
When the snack is gone, twist the ball fully open and rinse both halves and the mold under the tap. The smooth silicone wipes out fast.
Benefits
A loaded trough turns a quick snack into a long, calm chew, so a fast gulper or a bored pet has a job to settle into.
The twist-open seam means no small cap to lose, so you load a fresh snack and twist it shut in a moment.
The mold freezes homemade pucks from your pet's usual food, so you control what goes inside and buy fewer treats.
Soft food-grade silicone is kind on the gums yet takes a daily chewer, and it flexes rather than shattering.
The ball comes fully apart, so both halves and the mold rinse out under the tap with nothing trapped in the corners.
Compare
Bought together
Same category
FAQ